Double nozzles 5L water engine oil filling machine semi automatic large cylinder self-suction desktop piston driven filler
Model:GP-F02-5L
Filling heads number: Two
Voltage: 220V/60Hz, 110V/50Hz
Air pressure: 0.4-0.6MPa
Filling speed: 0-12 bottles/minute
Size: 442×650×1680mm
Filling accuracy: ≤±1%
Filling Range: 500--5000ml
Double nozzles filling machine Model:GP-F02-5L can be used to fill liquid and fluid products. Such as water, cooking oil, shampoo, detergent, hand soap, laundry detergent, essential oils, essences, etc. Self-priming and high degree of automation. You can choose whether you need a hopper, a table, etc. Can be ordered single head, double head.
The filling amount is adjustable. For different viscosity materials, the suction speed can be adjusted to obtain better self-priming effect.
The filling speed can be adjusted according to the operator's proficiency. (For products with poor fluidity, the self-priming speed can be slowed down. For products with good fluidity, the filling speed can be lowered to avoid spillage when filling in small doses)
The angle of the filling head can be adjusted to suit different sizes of bottles.
The connecting part is designed with a hoop for easy maintenance and cleaning.
High degree of automation: In the automatic filling state, the operator only needs to place the bottle under the filling nozzle and the machine automatically fills. After the filling is completed, remove the bottle and fill it with another empty bottle.
Optional filling range: 5-60ml; 10-120ml; 60-250ml; 120-500ml; 250-1000ml; 500-2500ml; 500-5000ml
Number of filling heads: single head; double head(can be customzied)
Working principle:
The piston in the cylinder is reciprocated by the forward and backward movement of the cylinder, so that a negative pressure is generated in the front chamber of the cylinder. When the cylinder moves backward, the piston is pulled backward, and the front chamber of the cylinder generates a negative pressure. The material in the supply tank is sucked into the material hose by the atmosphere, and enters the material tank through the inlet and outlet tees. When the cylinder moves forward, push the piston forward, squeeze the material, and the material enters the discharge hose through the one-way valve in the discharge joint to enter the empty bottle to be filled to complete the filling.
Performance and features:
1. This machine is controlled by compressed air, so it is especially suitable for use in explosion-proof and humid environments, and it is highly safe.
2, horizontal design, light and convenient, automatic suction. Eliminate the trouble of frequent feeding of vertical hoppers.
3, the machine and material contact parts are made of SUS304 stainless steel, processed by CNC machine tools, the surface roughness of the parts are less than 0.8. Polished inside and outside, in line with GMP standards.
4, using mechanical positioning, the measurement accuracy is up to ± 0.5%, so the filling accuracy can be controlled within five thousandths.
5, the filling mouth has anti-drip filling system to prevent the occurrence of dripping and drawing, no dripping phenomenon.
6, the material cylinder, the three-way part is equipped with a number of rulers, it is more convenient to adjust the filling amount.
7, according to actual needs, you can switch between "manual" and "automatic" filling state. The filling speed is fast and it can be automatically and continuously filled.
8. In the case of emergency stop, simply press the emergency stop switch, the piston automatically retreats back to the initial position, and the filling stops.
9, equipment failure rate is extremely low. The clamp type is fast, so it is more convenient and quick to disassemble and install.
Packaging before shipment:
